Novel electrospun polymer electrolytes incorporated with Keggin‐type hetero polyoxometalate fillers as solvent‐free electrolytes for lithium ion batteries

In this study, solvent‐free nanofibrous electrolytes were fabricated through an electrospinning method. Polyethylene oxide (PEO), lithium perchlorate and ethylene carbonate were used as polymer matrix, salt and plasticizer respectively in the electrolyte structures. Keggin‐type hetero polyoxometalate (Cu‐POM@Ru‐rGO, Ni‐POM@Ru‐rGO and Co‐POM@Ru‐rGO (POM, polyoxometalate; rGO, reduced graphene oxide)) nanoparticles were synthesized and inserted into the PEO‐based nanofibrous electrolytes. TEM and SEM analyses were carried out for further evaluation of the synthesized filler structures and the electrospun nanofibre morphologies. The fractions of free ions and crystalline phases of the as‐spun electrolytes were estimated by obtaining Fourier transform infrared and XRD spectra, respectively. The results showed a significant improvement in the ionic conductivity of the nanofibrous electrolytes by increasing filler concentrations. The highest ionic conductivity of 0.28 mS cm^?1 was obtained by the introduction of 0.49 wt% Co‐POM@Ru‐rGO into the electrospun electrolyte at ambient temperature. Compared with solution‐cast polymeric electrolytes, the electrospun electrolytes present superior ionic conductivity. Moreover, the cycle stability of the as‐spun electrolytes was clearly improved by the addition of fillers. Furthermore, the mechanical strength was enhanced with the insertion of 0.07 wt% fillers to the electrospun electrolytes. The results implied that the prepared nanofibres are good candidates as solvent‐free electrolytes for lithium ion batteries. © 2020 Society of Chemical Industry     

弯板式斜度机械调整卡具结构设计

机械压力机的飞轮、支撑套及圆盘类等零件在钻床、龙门铣床进行垂直、斜孔或面精密加工时,需要直立或倾斜固定于机床工作台或地平台基面,人工操作用时长,效率低,工人劳动强度大,零件倾斜角度调整定位精度较低,加工零件质量差,通过本文设计的这种弯板式斜度机械调整卡具装置可有效解决这类问题,达到零件进行垂直、斜孔或面精密加工的特殊要求。     

广西箭猪坡矿床首次发现的石英脉型锡矿体特征及 锡石微量元素地球化学意义

箭猪坡矿床是丹池成矿带南端的一个以铅锌锑为主的矿床，随着2012-2014年在箭猪坡矿床钻孔中石英脉型锡矿体的首次发现，打开了箭猪坡矿床新的找矿空间。新发现的锡矿体矿石矿物组合类型主要为锡石+闪锌矿+脆硫锑铅矿+黄铁矿+石英及锡石+脆硫锑铅矿+石英+方解石。箭猪坡矿床锡石呈自形-半自形粒状，锡石粒径多在0.1～0.2mm，少数0.02～0.05mm，分布在含硫化物的石英脉裂隙中。物相分析显示箭猪坡矿床锡主要赋存在锡石中，锡石物相占83.33%～100%。阴极发光（CL）图像显示箭猪坡矿床中的锡石经历了两期结晶作用：早期锡石（Ⅰ）和晚期锡石(Ⅱ），早期锡石CL荧光亮度较小，呈暗灰色至黑色；晚期CL荧光亮度较大，呈白色至浅灰色。锡石单矿物SnO2含量91.623%～96.288%，平均94.03%，杂质主要有Fe、W、In等，其中FeO含量0.02%～0.52%，WO3含量多在0.02～1.34%，In2O3含量在0.476%～0.954%，Sn与FeO、In2O3呈负相关，锡石中FeO、WO3、Ta2O5、Nb2O5、MnO含量指示箭猪坡锡形成于中低-中温热液环境，成矿热液来源于高度分异演化的花岗质岩浆。通过与大厂矿田西矿带上部脉状锡矿体的类比分析，具有相似的成矿条件及矿物组合，推测所揭露到的脉状锡矿（化）体相当于西矿带上部脉状锡矿（化）体，而下部的网脉状、似层状锡矿体尚未揭露到，由此预测箭猪坡矿床深部找矿空间及找矿潜力大。     

The phase change thermoelastic analysis of biological tissue with variable thermal properties during cryosurgery

Abstract

In this work, the coupling phase change heat transfer process and thermal stress behavior of biological tissue during cryosurgery are studied in the context of a generalized thermoelastic theory. The nonlinear governing equations are constructed while considering the variable thermal properties and solved by a time-domain finite element method based on the effective heat capacity formulation. A 2-D tumor and normal tissue model is adopted for simulating the freezing process in cryosurgery. The effects of temperature-dependent thermal properties and relaxation time on the responses of biological tissue are discussed and illustrated graphically.     

水平裂缝对坚硬顶板失稳破断的影响规律研究

为了研究水力压裂形成水平裂缝后坚硬顶板的失稳破断规律,基于材料力学和关键层相关理论,结合数值模拟,对含水平裂缝坚硬顶板的变形破坏特征和失稳破断机制进行了研究。结果表明:当坚硬顶板存在水平贯穿裂缝时,无论上位与下位岩层是否发生同步运动,坚硬顶板的破断步距均小于其初始极限跨距。存在水平贯穿裂缝的坚硬顶板及其上覆岩层,会形成拉压复合破坏区,更易于发生失稳破坏。坚硬顶板块体咬合点区域的拉压复合破坏作用是造成块体局部失稳、回转加剧和整体破断的主要原因。     

水下循迹航行器水动力学性能数值研究

为了研究低速水下循迹监测航行器的水动力学性能数值计算问题,采用FLUENT软件和SST剪切应力输运模型,通过雷诺时均N-S方程分析流速一定的情况下,取不同攻角、不同水平舵角作为来流条件,研究未安装推进器以及安装推进器且其安装位置不同时,航行器的升力系数、俯仰力矩系数、表面压力分布和流场速度的变化规律。结果表明:在未安装推进器以及推进器的安装位置不同时,随着攻角的变化,升力系数呈线性变化,俯仰力矩系数呈非线性变化;随着水平舵角的变化,升力系数和俯仰力矩系数呈线性变化。当推进器安装在航行器头部时,对航行器流场压力和流场速度变化影响最大;当安装在航行器尾部时,对二者影响最小。对于低速航行器,应尽量将推进器安装在中间靠后位置,以提高航行器的水动力性能。升力系数的试验结果与数值仿真结果之间最大相差7. 51%,阻力系数的试验结果与数值仿真结果最大相差5. 84%,均吻合较好。研究结果可以为低速水下循迹航行器的优化设计和发展提供理论参考。     

大通煤业主斜井带式输送机设计变更及工艺优化

本文基于大通煤业矿井兼并重组整合项目初步设计,结合矿井配套选煤厂的建设情况,利用现有的带式输送机,重新优化了主斜井带式输送机设计方案,并对优化方案的难点提出了解决方法,为同类型矿井的改造设计提供了参考。     

地面直井大液量水力压裂消突技术在石港矿的应用

针对山西石港煤业有限责任公司煤与瓦斯突出制约安全生产的问题,采用了地面直井大液量水力压裂消突技术,有效解决了问题,实现了安全高效生产,可为类似条件的矿井提供借鉴。     

严寒地区单体建筑太阳能-相变墙系统蓄热特性研究

利用太阳能对水加热并通入相变墙进行蓄热，对减少严寒地区单体建筑供热能耗有重要意义。以大庆市某单体建筑为例，结合该地区太阳能分布特点及建筑热负荷大小，对适用于该地区的太阳能-相变墙系统进行集热与储热能力计算，并采用CFD方法研究单一工况下该系统的热工变化规律及不同热水参数、换热管规格对相变墙蓄热特性的影响。结果表明：该相变墙热稳定性良好，但受自然对流影响，底部相变材料熔化较慢；管径DN25、入口流速0.3m/s、供水温度310.15K、回水温度309.15K、管间距107mm可使相变材料在4小时内完成蓄热，平均节能率为31.8%。研究结果可望为降低严寒地区建筑供热能耗提供新思路。